Do you need to speak to our experts?
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.
USB 2.0 cables connect and charge everyday devices such as printers, scanners, cameras, phones and game controllers at up to 480Mbps. The main choice is the connector at the device end, whether USB B, Mini-B or Micro-B, followed by length, from 0.12m extension leads to 30m active repeater cables.
Shop by type
Check the socket on your device first. Printers and scanners usually take an A to B printer lead. Older cameras and some sat navs use Mini-B 5 pin, while many older Android phones and PS4 and Xbox One controllers use Micro-B. A plug to socket extension leads add reach to an existing cable, and A to A male leads suit the few devices that need them. If your cable is close but not quite right, a gender changer, coupler or OTG adapter can bridge the gap.
Standard USB 2.0 cables work reliably up to 5m, and we stock most types in lengths from 0.25m to 5m. Short 15cm to 50cm leads keep desks and front-panel connections tidy. For longer runs, such as a 20 ft USB cable or more, use an active repeater extension. These contain a booster that keeps the signal clean, and we offer them from 10m up to 30m, plus a 10m active A to B printer lead.
Most cables here use 24AWG conductors, which suit data and everyday charging. Our HQ 20AWG Micro-B charger cable has thicker wires that lose less power over the cable. The certified shielded HQ range adds extra protection against interference, and clear leads include ferrite cores. Black USB cables make up most of the range, with white, clear, beige and red options in some styles, plus right-angled Micro-B leads and panel-mount extensions for cases and enclosures.
Yes. A USB 2.0 A plug fits USB 3.0 and later A ports, and the connection runs at USB 2.0 speed.
Yes. Our A to Micro-B and A to Mini-B data and charging cables carry both power and data. Charging speed depends mainly on the charger and the device, though thicker wire such as 20AWG helps reduce power loss.
Most printers use a USB A to B cable, often called a printer lead. We stock these from 0.25m to 5m, with a 10m active version for longer runs.
A standard passive cable should be no longer than 5m. Beyond that, use an active repeater extension cable, which we stock in lengths up to 30m.
AWG stands for American Wire Gauge and describes conductor thickness. A lower number means thicker wire, so a 20AWG cable has thicker conductors than a 24AWG or 28AWG cable.
Do you need to speak to our experts?
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.