Direct Burial External CAT7 Outdoor COPPER Ethernet Network Cable Reel Gel 305m

Our kenable Cat7 SF/FTP outdoor cable is designed with FULL COPPER 23AWG twisted pairs and each pair of cores has a foil shield as well as a foil braid inside the sheath to reduce interference and cross talk. This cable is capable of trasfering up to 10 gig at 600Mhz!

Supplied in a box with wooden spindle for easy installation. The spindle helps prevent cable snags and tangles inside the box.

The weatherproof UV Resistant PE sheath allows the cable to be outdoors without eroding over time. Suitable for burying underground mounting to buildings or installing indoors. The 9mm copper cable is more rigid than previous revisions of network cable but easy to install.

Premium grade External/Outdoor duct grade Cat 7 Network Cable. Suitable for burying underground weatherproof and UV resistant! This cable is made from Thick 23AWG Copper has a double sheath and is gel/Jelly filled.

The Petroleum gel/jelly inside the cable prevents ingress of moisture and water inside the core in the event of any damages to the cable.

Premium Double Sheath cable! This cable has an inner sheath and outer sheath. The inner sheath is used for protecting the cable from moistures which would affect the insulation. The outer sheath is UV resistant and weather-proof so the cable will not erode or split overtime. The PE jacket not only protects the cable from moisture but also adds to the physical strength of the cable.

This cable is fluke tested up to 90m. Fluke tested cables are tested for power or signal loss over distance.

Our range of Cat7 cables run much faster Cat 6 or Cat5 cables but are backwardly compatible. Our range of Cat 7 cables have double shielding to eliminate cross talk and interference. Referred to as F/STP under the sheath lies a foil shield and then underneath this each twisted pair is also inside a foil shield. Perfect for the latest in 4K TVs Gaming Consoles Macbooks PC s Laptops Notebooks CCTV Access Points Range Extenders and any other device that uses the RJ45 connection.

So what is the difference between Cat 5e Cat 6 and Cat 7 cables?

There are two main factors to look at when comparing network cables. The first is the speed (bandwidth) and the other the frequency (MHz).

The Speed determines how much data (bandwidth) can be sent through the cable. Cat 7 cables have a maximum speed/bandwidth of 10 000 Mbit/s but Cat 6 carries a lower 1000Mbit/s and the cat 5e range of cables carry up to 1000Mbit/s.

The Frequency or MHz indicates how often the signal can pass through the cable. Cat 7 cables have a very high frequency at 600Mhz but Cat 6 only has 250Mhz and Cat5e 100Mhz. Overall a Cat 7 cable will allow more bandwidth at a faster rate than the previous Cat 6 or Cat5e Cables.

Cat5e Has a speed to 1000 Mbit/s 100mhz
Cat6 Has a speed to 1000 Mbit/s 250mhz
Cat6a Has a speed to 10000 Mbit/s 500mhz
Cat7 Has a speed to 10000 Mbit/s 600mhz


Our range of Cat7 Cables have a double shielding (SF/FTP) to eliminate the chance of cross talk and interference from near by devices. These cables are FULL COPPER which is suitable for POE devices such as Access points WIFI Range extenders CCTV or networking switches that need to carry power via the Ethernet cable to a POE port.

This cable requires 9mm cable clips See QS: 010623

Wooden spindle for easy installation
Cat 7 10 GIG 600Mhz
Shielded SF/FTP Cable
23AWG Full Copper
Outdoor Use
Suitable for burial
Fluke Tested
Jelly/Gel Filled
Double Sheath
UV Resistant
Suiatble for POE (Power Over ethernet)
RoHs and Reach Compliant

We recommend to use punch down style connectors for Solid core cable and not standard crimp ends (these should be used with stranded cables).

Cat 6a faceplates:
Single: See QS: 009323
Double: See QS: 009324


For RJ45 connectors see QS: 010974
Cat 7 Faceplates: Stock Due