Category 6A Ethernet cable commonly referred to as Cat6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6 Cat5e and Cat5.
LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire.
Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second).
S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
Snagless Connectors: The connectors feature a bubble inch which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device
This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2
IEC 60332-1-2 RoHS Compliant and 3P Verified CAT6A cable Injection moulded snagless connectors Screened / Foil twisted pair Low Smoke Zero Halogen 4x 26 AWG Copper 600MHz RJ45 Shielded connector with 50µ Inch Gold Plate
|Country of Origin
||Low Smoke Zero Halogen