This camera is fitted with a SONY CMOS STARVIS sensor. A STARVIS sensor increases the light sensitivity in low lit areas for example an alley way or dull warehouse and utilizes a range of wave lengths to increase the light and better the image recorded. As a result of this it is capable of capturing up to 2 or more times the sensitivity of other standard CCD (charge coupled device) CMOS image sensors.
The STARVIS Sensor also has a much better sensitivity to near infrared light. This is important when you have a completely dark condition or when using the day/night function on the camera. It provides a much higher quality night image with a clearer overall image in the dark.
On top of this the image sensor supplied by SONY also provides a higher resolution and better tones than standard CMOS sensors due to the larger images sensor used by SONY.
The AHD camera is capable of 1080p resolutions and is a 4 in 1 so can be used with formats such as TVI/CVI/CVBS and of course AHD systems. They are perfect for upgrading your cameras and using your existing DVR and cables.
Image Sensor: ½.8 inch SONY 2.1MP STARVIS Sensor Resolution: 1080p Signal System: PAL or NTSC Minimum Illumination: 0.01 Lux/F1.2 S/N Ratio: More than 52dB Synchronous System: Internal IR Distance: 20 Meter IR Power On: Photodiode Auto Control Video Outputs: CVBS/CVI/TVI/AHD Power/Current: DC 12V (+/-10%) 550mA Lens: Board Lens 3.6mm Weatherproof: IP66 Dimensions: 94.5 x 76mm Weight: 450g Operating Conditions: -10 +50oC RH59% Max
Need a DVR for your install? Please see QS below: 08788
Please Note: This camera may need to be set to the same mode as your DVR to do this simply move the camera control button in the direction it needs to cycle between modes.
|Country of Origin